FAQ. Maintaining and Servicing Your Furniture
Perform a thorough inspection of each chair, bar stool, table top and table base once a month. Particular care should be taken in inspecting structural joints, welds and fasteners (i.e. screws, nuts, bolts, etc.) thatcan be loosened during normal use. If a product shows any sign of structural failure (i.e. welds, tabs, hardware, etc.), Eukya strongly recommends taking it out of service immediately and repairing it prior to putting it back into service.

FAQ. Maintaining and Caring For Your Wood Furniture
Wood should not be subjected to extreme temperatures under any circumstances, particularly heat or moisture near cooking facilities. Clean all wood furniture with furniture polish, never use water or a water based cleaner which can result in the grain and finish raising and peeling.

FAQ. Maintaining and Caring For Your Metal Furniture
Regularly check glides to make sure all of them are in place to prevent any slipping or tipping of the chair/barstool. Finished product can be cleaned with a mild soap and water solution. In a case where the finish has been damaged, repair by sanding the area lightly and applying a light coat of touch up paint from a spray can.

FAQ. Cleaning Vinyl Upholstery
Clean all vinyl with a mild soap and water. Spills or spots need to be cleaned promptly. Otherwise, some stains can become permanent.

FAQ. Cleaning Fabric Upholstery
Determine the correct composition of the fabric and then clean with a substance recommended for the material according to the directions. Cleaning fabric with the wrong substance may result in permanent damage.

FAQ. Maintaining and Caring For Your Table Tops
Do not use abrasive cleaners on any table top. Eukya recommends using furniture polish for wood finish tops, or a soft cloth and glass cleaner for laminate tops.